Tuesday, November 25, 2008

2004 Nanjian Phoenix Tuocha


I never get too excited about drinking tuos, I don't know why, maybe it's just because I haven't fallen in love with any of them, but it leads them to sit around forever. I can't remember when I got this tuo, but it managed to survive the storage mishap without so much as a speck of mold.


It is is low-grade, made up of very small pieces of leaf, and some very, very small leaves. Definitely not daye (large-leaf). Perhaps as a direct result, the soup is thick, cloudy, and a pleasant orange. Aroma is light, grassy (dry), and something spicy. The taste has a lot of kick, but not much flavor, very prone to becoming overly astringent, bitter, and dry. No aftertaste more than a dry grass, and unsweet honey. However, as the more intense flavors die off in later infusions, a light honey taste and sweetness shines through.


Overall, the tea isn't any good to drink yet. I guess all the kick it has is going to result in some lasting complexity as it ages. I probably won't drink this stuff again for at least another 5-10 years. On the plus side, it does feel like this tea is doing a number on all the extra food in my belly.

Saturday, November 22, 2008

Pu-erh Storage and Mold and A Return to '06 Yongpinhao


Mold

It's the one thing that can go wrong with pu-erh. Mold is also one of the things responsible for pu-erhs maturation. So, while mold is good, it can also be bad, very bad. Yellow mold on pu-erh is said to be toxic, however, a light frosting of white mold is said to be beneficial. So, in short, mold development must be kept in balance.

Sadly, a few bings in my collection have developed mold. This mold has passed the beneficial point. It journeys into the realm of yellow pu-erh mold. Not only the color, but also the rate at which it has developed is a bad sign (in this case, under a year). Because of the lack of information on pu-erh on the web, especially in the field of mold development, I'm hoping this will be of interest and help to enthusiasts.

The story...
So, here's what happened. I made a storage cabinet for my puerh, with elevated RH levels in the 70-80% range. I got careless in opening it up for air exchange at one point, leaving it closed up for 3-7 days at a time. After a couple months of this, I found mold growing on one of my cakes. I checked most of them out, and about half are affected, this '06 Yongpinhao, for some reason, took the grunt of the burden...


Pu-erh mold starts on stems...
What's very interesting to note, is that the mold is essentially only growing on stems. Is this typical? Does pue-erh mold generally start on stems? Did the stems soak up more water from the air because they're, well, stems, and made to transfer water? Hard to know because of the miniscule amount of data out there. From what I can remember, I haven't seen mold exclusively on stems. Hobbes of the half-dipper posted this photo of moldy puerh (which he drank), which shows mold on the leaf. This seems typical to me. My other bings that have developed a lesser amount of mold, also show it almost exclusively on the stems. Bings from the cabinet that don't have many large stems showing, for example the 01 baoyan, don't have any mold.


So, for now I have opened up the cabinet to ensure good airflow, and removed humidifiers. The area is resting at just over 60%RH on average. For one very stemmy cake ('05 ming-yuan hao), I brushed off the mold from half of it with a toothbrush. The mold on that side hasn't returned, but the mold on the other side hasn't gone away either.


These pictures are all of the '06 Yongpinhao, which I will revisit in this entry. The mold on the other cakes isn't significant enough to photograph, and appears at most as a very light frosting on the cake, with some more significant development on the looser edges of the cake, again, only on the stems. My plan is to brush the mold off all of the affected, except for the ming-yuan, which I will watch closely to observe development. The Yongpinhao is not being subjected to a brushing, but to more air circulation, and light. While these aren't good for the tea, they'll hopefully take care of the mold, and it will be interesting to learn what it takes to get rid of the mold.

So what happened...
Over a few months, in a storage cabinet with no air flow for 3-7 days at a time, and 70-80%RH, raw sheng bings developed significant visible mold. Most with only minimal amounts, occurring mostly on the looser edges, and exclusively on stems. After being opened to free air flow, and resting in an RH just over 60% for a few weeks, the mold has not gone away, but has not increased either.

If you're curious about anything, feel free to shoot me an e-mail (address found at bottom of page).

2006 Yongpinhao Yiwu Zhengshan

I reviewed this tea a while back. My final thoughts were that I was very interested in how the strong lemon/zest and lumber flavors would develop over time. I've been interested in the storage of this cake ever since.

9 Months Later...


Because of the condition of this cake, I had to chip leaf off of the bottom, where there was less mold. I also rinsed it twice, just to be careful. But, to be honest, the mold doesn't scare me too much. Mold is what makes pu-erh better, or so I will tell myself.


So, I'm tasting this 9 months later, and I've noted some new things. First off, the color is much darker, an orange now. Quite amazing really. Compare the orange above to the yellow of this photo, taken 9 months ago:


In addition than the color, the tea has changed in multiple other ways. It now has a very noticeable mouthfeel; it's viscous, and sticks to the tongue and cheeks. I can still smell the lumber on the wet leaf, but I believe that it's a subjective scent. It took a moment for me to recognize the aroma as lumber. It was like it was hidden beneath the other aromas. The taste now is much sweeter. There's still a lot of orange/zest to it. Some smoke, but little bitterness if brewed with very short infusions (except when it has cooled off, then it is very bitter, and can be very bitter with longer infusions). Some astringency sticks to the throat, drying it out.

Now, I don't think this cake is of good quality. In fact, I find it to be pretty low. So, why do I like it? I enjoy the flavors it presents, especially the lumber and orange/zest, and am real interested in how these will change over the years. Puerhshop still has them in stock, for $17/400g, which is worth it to me. So, I think I'll buy another, and keep it mold free, but I'll keep this moldy one around to see what happens to it.

Sunday, November 2, 2008

Chiran Yutaka Midori O-Cha

A while ago, I tried this sencha grown in Chiran, Kagoshima from Itoen which came from the kanaya-midori breed. I found it to be a light-flavored asamushi. Today, I have another sencha from Chiran from one of my favorite online sencha suppliers, O-Cha.com. It comes from a yutaka-midori breed plant.


The dry leaf is really broken up. According to the description, this tea is deeper-steamed, thus the more broken leaf. The first steep is a clear yellow-green, with an aroma that is slightly foody, yet succulent. The taste is very satisfying, but very different from most of O-Cha's high-quality senchas. The foody aroma transfers into the taste, which gives the tea a lot of body and warmth. However, it also reminds me of lower quality sencha, and even bancha. This characteristic gives the tea a much less refined feel. A medium viscosity and thick mouthfeel tell me the tea is situated right around the chumushi (medium-steamed) range.


The second steep finally delivers that thick, deep-green liquor. Now, the taste hasn't changed much, still being foody and succulent, but it has blended and come out fuller. This tea actualy reminds me a lot of Itoen's makinohara fukamushi, but I think the chiran rests a few levels above, for just $2 more. Compared to O-cha's more expensive ($23-28) offerings, it doesn't quite match up. But because it's only $18, I believe it holds its place. I really can't tell any similarity between this chiran and the other one from Itoen. Whatever differences in upbringing, and processing are greater than the similarities chiran soil and climate must impart.


I've been drinking lots of gyokuro and asamushi sencha lately. This chumushi is obviously quite different. It delivered 3 flavorful steeps, all thick and succulent. If this is your price range, then it's not a bad choice. If you can, I highly recommend stepping up to O-Cha's classic offerings. $7 more will get you a better Kagoshima Yutaka Midori that few other chumushi sencha can compete with.